Surbuf's R Series applicator and buffing pads are designed specifically for use on random orbit sanders/polishers and are so easy to use that with a little practice, anyone can get professional results the first time and every time - without working up a sweat!
 |
 |
 |
 |
 |
Apply
a small amount of product to the center of the pad, then place the pad
on the surface before turning on the machine. Surbuf pads require half
as much product as other types of pads. . |
|
Fine
cut cleaners and polishes require that the product be worked for a period
of time to achieve their purpose. Follow manufacturer's recommendations
for application. . |
|
|
When applying wax, always use parallel strokes and overlap each stroke
slightly. Do not go back over the areas since this will make the wax
gum up and become difficult to remove. . |
|
|
Always
work one small area at a time. Allow the wax to set until almost completely
dry. Then buff with a clean Surbuf pad to achieve depth and brilliance
of shine. . |
|
|
Always
clean pads immediately after use. Hand wash with Greased Lightning™,
Simple Green® or a dish soap and then allow to air dry. Place the
clean, dry pads in a plastic bag or the original package to protect
them for future use. . |
|
Greased Lightning™ is a registered trademark of A&M Cleaning
Products, Inc.
Simple Green®
is a registered trademark of Sunshine Makers, Inc.
4301
Chimney Lake Drive • Roswell, GA 30075 • USA
:: Contact Customer Service ::
All content © Copyright 2003, Kjibe, Inc. All Rights Reserved.
.
